Today I will introduce you the basic operation method of cnc cylindrical grinding machine.
Preparation before starting:
1. Check whether the grinding wheel is loose, whether there are cracks, whether the protective cover is firm and reliable, whether the electrical switch is normal, etc.

2. The operator should understand the performance, specification, function and operation method of each handle of the cnc cylindrical grinding machine; fill in the record sheet after inspection.
3. According to the instruction manual of the grinding wheel, select the grinding wheel with the same rotation speed as the spindle of the cnc cylindrical grinding machine.
4. When clamping the grinding workpiece, carefully check whether the clamping is correct and firm; when loading and unloading the workpiece, the grinding wheel should be raised to a certain safe position to prevent hand grinding;
5. Before grinding, put the workpiece on the disk to make the pad stable, then connect the magnetic switch and the grinding wheel switch, and turn on the cooling switch; after power-on, check that the workpiece is firm before grinding; when grinding multiple workpieces at a time, machining The parts should be well padded and placed in the grinding range to prevent the workpiece from tilting and flying out or squeezing the grinding wheel.
6. When grinding, the grinding wheel must be rotated and balanced before entering the tool; when entering the tool, the feed rate should be correctly grasped; the grinding wheel cannot immediately contact the workpiece, the gap should be maintained, the feed should be slow, and overload operation is strictly prohibited to prevent damage to the machine spindle. The grinding wheel is broken and flying out or the workpiece is squeezed out to hurt people.
7. The automatic reciprocating cnc cylindrical grinding machine should adjust the limit stopper according to the grinding length of the workpiece, and tighten the stopper screw.
8. The dry grinding workpiece shall not be added with coolant halfway; when the coolant of the wet grinder stops, the grinding shall be stopped immediately. After the work is finished, idle the grinding wheel for 5 minutes to remove the coolant from the grinding wheel.
9. When the grinding wheel does not exit the workpiece, the rotation of the grinding wheel must not be stopped, and the grinding machine can be stopped only after the grinding wheel exits.
10. When using diamond to repair the grinding wheel, use the fixing frame to fix the diamond, do not repair it by hand.
11. Before grinding, the protective baffle should be blocked. During the grinding process, it is forbidden to touch the machined surface of the workpiece by hand.
The basic operation method of cnc cylindrical grinding machine is introduced here, have you learned it?