language
HuaDong
中国
HuaDong
韩国
HuaDong
韩国
HuaDong
韩国
HuaDong
韩国
HuaDong
韩国
媒体中心

媒体中心

了解详细

Double column surface grinder manufacturers take you to understand how the "oscillation pattern" is generated when the surface forming grinder is processed

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-07-01
  • Views:0

(Summary description)Double column surface grinder manufacturers tell you that the surface forming grinder is a slow-feed forming grinder, which can grind parts with different shapes and contours.

Double column surface grinder manufacturers take you to understand how the "oscillation pattern" is generated when the surface forming grinder is processed

(Summary description)Double column surface grinder manufacturers tell you that the surface forming grinder is a slow-feed forming grinder, which can grind parts with different shapes and contours.

  • Categories:News
  • Author:
  • Origin:
  • Time of issue:2022-07-01
  • Views:0
Information

Double column surface grinder manufacturers tell you that the surface forming grinder is a slow-feed forming grinder, which can grind parts with different shapes and contours. The process reform from plane to surface processing is suitable for forming parts in the fields of aviation, aerospace, ships, automobiles, etc. processing.

Discount Double column surface grinder supplier(s) china
The manufacturer of Double column surface grinder tells you that the X-axis of the surface forming grinder is driven by a hydraulic proportional valve, and the movement is stable and reliable; the Y-axis adopts a linear guide and is driven by a servo motor, which has high positioning accuracy; It has high repetitive positioning accuracy, and can be automatically and manually fed and ground.
The forming surface grinder has an independent hydraulic oil tank to prevent the thermal deformation of the machine tool castings due to high oil temperature and maintain the accuracy and stability of the machine tool. The operating system of the machine tool can automatically dress the grinding wheel and the compensation function after the grinding wheel is dressed. Double column surface grinder manufacturers tell you that it has a fully sealed protective cover to prevent water and dust from floating in the workshop during the grinding process, effectively purifying the cleanliness of the processing site, and protecting the personal safety of operators.
The generation of "oscillation lines" during the processing of the surface forming grinder is mainly caused by the vibration of the machine tool itself or the vibration of the workpiece during the grinding process:
1. The operation of the grinding wheel is unstable, it may be that the flange of the grinding wheel is not clamped correctly, or the dynamic balance is not adjusted properly. Requires new installation of grinding wheel and adjustment of balance.
2. The bearing in the main shaft is worn or improperly adjusted, which drives the grinding wheel to vibrate. Bearing clearances should be readjusted or bearings should be replaced.
3. The manufacturer of Double column surface grinder tells you that the vibration of other equipment is transmitted to the grinder and causes resonance, so you need to stay away from other vibration sources or dig anti-vibration trenches.
4. Since the height of the center of the blade supported by the dunnage increases, the blade is not firm and vibrates when the workpiece passes through. The screws that hold the blade in place need to be tightened.
5. The grinding wheel spindle is driven by the motor through the V-belt. The length of the V-belt is different or worn, which causes the machine tool to vibrate. Need to check and replace.
6. The manufacturer of the Double column surface grinder tells you that the center of the workpiece is too high. The grinding wheel presses the workpiece against the blade through the grinding force, and the component force of the guide wheel is reduced, causing uneven force on the workpiece and vibration. At this time, the center height of the blade should be reduced.

Keyword:

Scan the QR code to read on your phone

E-mail:hdcnc@vip.163.com  /  Tel:+86-631-5968595  /  Address:No.698 Huanshan Road, Economic and Technological Development Zone, Weihai City, Shandong Province

COPYRIGHT© 2020 Weihai Huadong Automation Co., Ltd     鲁ICP备18033358号    Powered by www.300.cn

搜索
Search