When we operate hmc machining center, we may ignore the main points of operation. The following editor will take you to see the main points of hmc machining center operation:

1. Ensure that the processing content of the workpiece is completed within the stroke range of the spindle.
2. Try to complete all the processing content in one clamping. When it is necessary to replace the clamping point, special attention should be paid not to damage the positioning accuracy due to the replacement of the clamping point, and explain it in the process document if necessary.
3. The fixture should have as few components as possible and high rigidity.
4. In order to simplify positioning and installation, each positioning surface of the fixture should have precise coordinate dimensions relative to the processing origin.
5. For hmc machining centers with interactive worktables, fixture design must prevent spatial interference between fixtures and machine tools due to the movement of the worktable, lifting, lowering, and rotation.
6. The fixture should be opened as much as possible, the spatial position of the clamping element can be lower or lower, and the installation fixture should not interfere with the tool path of the working step.
7. It can be disassembled in a short time and changed into a fixture suitable for new workpieces. Since the auxiliary time of hmc machining center has been compressed very short, the loading and unloading of supporting fixtures cannot take up too much time.
8. In order to ensure that the installation orientation of the parts is consistent with the direction of the workpiece coordinate system and machine tool coordinate system selected in the programming, and directional installation.
The above are the relevant operation points of hmc machining center. I hope the above content can be helpful to you. Thank you for your viewing and support. We will organize more information for you later. Please pay attention to our website updates.