PLC surface grinder is a type of grinder that grinds the plane or forming surface of the workpiece. Today, let's take a look at the basic knowledge of its operation.

1. Before using the PLC surface grinder, check whether the machinery, screws are firm, electrical appliances, protective devices, vacuuming devices, work card measuring tools, etc., must be in complete and good condition.
2. After checking each part by hand, check the longitudinal reciprocating motion of the grinding head, and after confirming that it is normal, the work can be carried out.
3. Manually adjust the position of the reversing stopper according to the grinding length of the workpiece before work, and tighten it.
4. The PLC surface grinder manufacturer tells you that when the machine tool is working, the pressure of the hydraulic system should not exceed the specified range. The oil temperature should not exceed 50℃. When there is air in the oil cylinder, the grinding head should go back and forth several times with the maximum stroke to exhaust.
5. The machine tool has no automatic and manual interlocking mechanism for longitudinal movement, but when using hydraulic automatic reciprocating motion, the handle must be pulled out.
6. Always check the fixture, the tightening of the workpiece, the balance tightening of the grinding wheel and the tightness of the belt during work. The blunt grinding wheel should be repaired in time.
7. When dressing the grinding wheel, the diamond knife is fixed on the special bracket, and it is strictly forbidden to hit it during operation, and protective glasses should be worn.
8. When the grinding wheel is not separated from the workpiece, it is not allowed to stop.
9. The PLC surface grinder manufacturer tells you to follow the general safety rules of the grinder when replacing the grinding wheel.
10. It is not allowed to touch the workpiece in grinding or transfer things across the moving parts.
11. When adjusting, repairing, lubricating, and wiping the machine tool, it must be stopped before it can be carried out.
The above is the introduction of the basic knowledge of PLC surface grinder operation, I hope to help you.