The manufacturer of hmc machining center tells you that the machining center is a kind of CNC machine tool with relatively complete functions. It integrates milling, drilling, reaming, boring, tapping and thread cutting, so that it has a variety of technological means. Compared with ordinary machine tool processing, machining centers have many significant technological advantages.

1. High processing precision. The manufacturer of hmc machining center tells you that the processing on the machining center is highly concentrated, and most or even the entire surface of the part can be processed in one clamping, which avoids the clamping error caused by multiple clamping of the workpiece. Therefore, the processed surface Higher fishing mutual position accuracy can be obtained. At the same time, most machining centers use half-loop or even full-closed-loop position compensation functions, which have high positioning accuracy and repeat positioning accuracy. The dimensional errors generated during the machining process can be compensated in time. Compared with ordinary machine tools, they can obtain higher High dimensional accuracy.
2. Stable precision. The entire processing process is automatically controlled by the program and is not affected by the operator's human factors. At the same time, there are no hardware such as cams and profiling, which eliminates the errors caused by wear and tear during manufacturing and use. Coupled with the position compensation function of the machine tool and high positioning accuracy and repeat positioning accuracy, the dimensional consistency of the processed parts is good. .
3. High efficiency. The hmc machining center manufacturer tells you that one clamping can complete the processing of more surfaces, reducing the auxiliary time required for multiple clamping workpieces. At the same time, the turnover times and transportation workload of workpieces between machine tools and between workshops are reduced.
4. Good surface quality. The spindle speed and the feed rate of each axis of the machining center are stepless word speed, and some even have adaptive control function, which can adjust the cutting parameters to the best value according to the change of tool and workpiece material and tool parameters, thus improving each The quality of the machined surface.
5. The software has good adaptability. The hmc machining center manufacturer tells you that the processing content, cutting amount, and process parameters of each process of the parts can be programmed and modified at any time, which provides convenience for new product trial production, new process flow and testing. But it is processed on the machining center. Compared with processing on ordinary machine tools, there are still some shortcomings. For example, the tool should also have higher strength, hardness and wear resistance; when the cantilever cuts the hole, there is no auxiliary support, and the tool should also have good rigidity; On the other hand, affecting the smooth progress of processing, it is necessary to take chip breaking measures and clean up chips in time; one clamping completes the processing from blank to finished product, and there is no aging process. The internal stress of the workpiece is difficult to remove; the hmc machining center manufacturer tells you that the maintenance management requirements are high, and the operator should have a high technical level; the price of the machining center is generally hundreds of thousands to several million yuan, one-time The investment is large, and the processing cost of the parts is high.