The double column mill manufacturer tells you that the grinding machine is a high-efficiency surface processing machine tool. It can grind two parallel end faces at the same time in one process. According to the structure, it can be divided into horizontal type and vertical type. According to the feeding method, it can be divided into two types: It is penetrating, rotary and reciprocating. The following will take you to understand the grinding process of the grinding machine.

1. Side grinding problem: In the daily use of the grinder, we often find that some operators use the side of the grinding wheel for grinding at will, regardless of the type of the grinder and the type of the grinding wheel, which seriously violates the safety operating regulations. According to regulations, the grinding wheel with the circumferential surface as the working surface is not suitable for side grinding. This kind of grinding wheel has high radial strength and low axial strength. The double column mill manufacturer tells you that when the operator uses too much force, the grinding wheel will break and even hurt people. This behavior should be prohibited in actual use.
2. Frontal operation problem: In daily use, many operators are used to operating directly against the grinding wheel, because they can work hard in this direction. In fact, such behavior should be specifically prohibited in the operation of the grinder. The double column mill manufacturer tells you that according to the operating regulations, when using a grinder to grind a workpiece, the operator should stand on the side of the grinding wheel and not operate in front of the grinding wheel, so as to avoid the grinding wheel from malfunctioning, flying out of the grinding wheel or breaking and flying out and hurting people.
3. Mandatory operation problem: when using the grinder, some operators, especially young operators, use too much force due to the excessive grinding speed, which is a very unsafe operation behavior. The double column mill manufacturer tells you that the flat body of any grinding wheel has a certain strength, which is likely to cause the grinding wheel to be crushed or even fly out and hurt people. This is also a prohibited behavior.
4. Joint operation problem: In actual daily operations, this situation will also occur. Some people rob production tasks and work time, and two people share a grinding machine to work at the same time, which is a serious illegal operation and should be strictly prohibited. The double column mill manufacturer tells you that when one grinding machine is not enough, it can be solved by adding another grinding machine, and it is not allowed to share one grinding wheel on the same machine.