The hmc machining center refers to a machining center where the worktable and the spindle are placed in parallel. The hmc machining center products generally have three linear motion coordinate axes and one worktable rotation axis. After clamping the workpiece once, the hmc machining center can actively select different tools according to the program, actively change the spindle speed, and complete the processing of multiple processes on multiple surfaces in sequence according to the programming sequence. This type of machining center is suitable for processing cabinet parts.

Installation environment of hmc machining center
A large gantry machining center manufacturer tells you that the hmc machining center should be installed far away from the earthquake source, and not exposed to direct sunlight, nor radiate heat and humidity. If there is an earthquake source near the installation location of the hmc machining center, an anti-vibration groove should be set around the hmc machining center. If there is no anti-vibration groove, it will directly affect the machining accuracy and stability of the hmc machining center. With the passing of time, it will affect the bad touch of electronic components, cause defects and affect the reliability of hmc machining center products.
Strictly control voltage and current
The hmc machining center is generally installed in a processing plant. There are many mechanical equipment in the processing plant, which will inevitably cause a great shake of the power grid. Therefore, the device location of the hmc machining center must strictly control the voltage and current of the power supply. The voltage and current of the power supply must be controlled within the allowable range of the hmc machining center. The voltage and current of the power supply must be stable, otherwise it will directly affect the horizontal normal machining center.
Temperature and humidity will directly affect hmc machining center
The hmc machining center generally needs to work in an environment below 30 degrees Celsius. Generally, the exhaust fan and cooler are installed in the distribution box of the hmc machining center to ensure that the electronic parts and the central processor work at a constant temperature. . If the temperature and humidity are too high, the life span of the control system components will be shortened, and it will undoubtedly increase the defect rate of hmc machining center products. If the humidity increases, the dust on the integrated circuit board will increase, which will directly lead to poor touch and short circuit problems.
Machine factory parameter setting
When using the hmc machining center, the customer cannot change the factory parameter settings of the machine at will, because these factory parameter settings are directly related to the dynamic characteristics of each part of the hmc machining center, and only related to the gap compensation parameter value can be set according to the actual situation. If you want to change the factory setting parameters, you should contact the manufacturer and change the factory parameter settings under the guidance of the manufacturer's technicians.