Double column milling machine manufacturers tell you that milling machines mainly refer to machine tools that use milling cutters to process multiple surfaces of workpieces. Usually the milling cutter mainly moves by rotation, and the movement of the workpiece and the milling cutter is the feed movement. The manufacturer of Double column milling machine tells you that it can process planes, grooves, as well as various curved surfaces, gears, etc.

Safety rules for operating milling machines:
1. When loading and unloading the workpiece, the tool must be removed, and the cutting head and hands must not approach the milling surface.
2. When using the milling machine to set the tool, it must be slow forward or hand cranked, fast forward is not allowed, and the tool is not allowed to stop when moving the tool.
3. Double column milling machine manufacturer tells you to pay attention to whether the handle of Xuzheng milling machine will hit people when fast forwarding and retreating the tool.
4. Do not feed too fast, do not change speed suddenly, and adjust the limit stop of the milling machine.
5. The milling machine must be stopped when moving up and down, measuring the workpiece, adjusting the tool, and tightening the speed change.
6. When disassembling the end mill, the work surface should be padded with wood, and the nut should be flattened, and the force should not be too strong.
7. The manufacturer of Double column milling machine tells you that it is strictly forbidden to touch or wipe the rotating parts and knives with cotton yarn, and it is forbidden to lift the cutter head by hand.
8. The manufacturer of Double column milling machine tells you that in general, a chuck can only clamp one workpiece at a time. Because one chuck clamps more than one workpiece at a time, even if it is clamped tightly, the force is very large when the tool is coarsely fed, and the two workpieces are easily slipped between them, causing the workpiece to fly out, the knife is broken, and people are injured.