Horizontal axis and rectangular table surface grinder: The Kent surface grinder manufacturer tells you that the workpiece is sucked or clamped on the worktable by the rectangular electromagnetic worktable, and reciprocating longitudinally. The grinding wheel carriage can make transverse intermittent feed movement along the dovetail guide rail, and the sliding seat can make straight and intermittent feed movement along the guide rail of the column. The workpiece is ground around the grinding wheel with high grinding accuracy.

Vertical axis round table surface grinder: The Kent surface grinder manufacturer tells you that the vertically installed grinding wheel spindle uses the end face of the grinding wheel to grind the workpiece, and the grinding wheel holder can make intermittent straight feed movement along the guide rail of the column. The workpiece is mounted on the rotating round worktable for continuous grinding, and the production power is high. The Kent surface grinder manufacturer tells you that in order to facilitate loading and unloading of workpieces, the round table can also be moved longitudinally along the bed rails.
Horizontal axis round table surface grinder: It is suitable for grinding round and thin workpieces, and can be skewed to grind ring-shaped workpieces with different thicknesses on the working table.
Vertical spindle and rectangular table surface grinder: The Kent surface grinder manufacturer tells you that because the diameter of the grinding wheel is larger than the width of the working table, the grinding area is larger, which is suitable for efficient grinding.
Double-face grinder: Kent surface grinder manufacturer tells you to use the grinding wheel end faces of two grinding heads to grind two parallel planes of the workpiece together. There are two types of horizontal shaft and vertical shaft. The workpiece is guided through the grinding wheel by linear or rotary feeding equipment. The manufacturer of Kent surface grinder tells you that this kind of grinder has high power and is suitable for mass production of parts such as bearing rings and piston rings.