CNC vertical milling machine plays a very important role in life, so what do we need to prepare before working on CNC vertical milling machine? Let's take you to find out below.

Preparation before CNC vertical milling machine work:
1. Before operation, you must be familiar with the general performance, structure, transmission principle and control procedures of the CNC milling machine, and master the functions and operating procedures of the operating buttons and indicator lights. The CNC vertical milling machine manufacturer tells you not to operate and adjust the machine tool until you understand the entire operation process.
2. Before starting the machine tool, the CNC vertical milling machine manufacturer tells you to check whether the electrical control system of the machine tool is normal, whether the lubrication system is unblocked, whether the oil quality is good, and add enough lubricating oil according to the regulations, whether the operating handles are correct, the workpieces and fixtures And whether the tool has been clamped firmly, check whether the coolant is sufficient, and then drive the slow car idling for 3 to 5 minutes, check whether the transmission parts are normal, and confirm that there is no fault before normal use.
3. After the program is debugged, it must be approved by the instructor to operate according to the steps, and it is not allowed to skip the steps. The manufacturer of CNC vertical milling machine tells you that if you operate without the permission of the instructor or operate in violation of regulations, the score will be treated as zero points, and those who cause an accident will be punished according to relevant regulations and compensated for the corresponding loss.
4. The CNC vertical milling machine manufacturer tells you that before machining parts, you must strictly check whether the machine origin and tool data are normal, and run a simulation without cutting trajectory.
Today’s CNC vertical milling machine preparations before work are introduced here. If you have any questions, please contact us.