How to maintain Kent grinder? Let's take you to learn more about it below.

Kent grinder routine maintenance:
1. Routine work
In order to ensure mechanical accuracy and longevity, regular maintenance must be carried out.
(1) Clear the grinding of each part
(2) The exposed metal surfaces of the machine tool are wiped clean and then oiled
2. Permanent magnetic chuck
The Kent grinder manufacturer tells you that the suction cup surface is the benchmark for workpiece grinding accuracy and must be maintained and maintained. If the precision of the hard work is poor or the disk surface is bruised, the suction cup surface must be ground again to make the precision of the disk surface meet the requirements in order to ensure the accuracy of the work object.
3. Grinding wheel
The Kent grinder manufacturer tells you that the grinding wheel spindle of our factory can be used for several years without refueling. When the accuracy is reduced or damaged, it needs to be sent back to our factory for repair, adjustment of dynamic balance or replacement of original components, such as bearings, to ensure life and accuracy .
4. Lubricant
The Kent grinder manufacturer tells you to change it every six months. Loosen the drain plug under the pool at the bottom of the upper frame, and release waste beef oil. When changing the oil, clean the inside of the oil pool and the filter together.
5. Dust suction filter: Kent grinder tells you to clean it once a week. Step on the dust removal pedal at the lower part of the vacuum box to clean the filter, and take out the plate under the filter to discard the abrasive debris.